Configure a New Source Control - Side A Tab

Configure the side A database settings by selecting the Side A tab.

NOTE:

All required fields must me completed before you can save the configuration.

Connector ID – Enter the connector ID. (Required)

Type – Displays the type of connector used. The default value in this box is Remote. (This field cannot be changed.)

Time Out Value – Displays the time-out value for the connector. The default value for this field is 180000. (This field cannot be changed.)

Update Connection Retry – Displays the number of attempts to retry when connecting to the database. The default value for this field is 50000. (This field cannot be changed.)

Application Name – Displays the application name for side A. The default value for this field is icAppsConapiService. (This field cannot be changed.)

Application Key – Displays the key that is associated with the application displayed in the Application Name field. The default value for this field is eLoyalty. (This field cannot be changed.)

Remote Service Name – Displays the remote service name. The default value for this field is icAppsConapiServer. (This field cannot be changed.)

Remote Host IP – Enter the Internet Protocol (IP) address for the remote host. (Required)

Remote Registry Port – Enter the port number required for the remote registry. The default value for this field is 3099. If the port requires a different number, you can erase the default and replace with another number.

Transport Type – Displays the type of transport used to communicate with the database. The default value for this field is RmiDriver. (This field cannot be changed.)

Disable Conapi Auto Connect – Indicates if the Conapi auto connect feature is enabled or disabled. The default value for this slider control is No. (This field cannot be changed.)

Connection Attempts – Displays the number of connection attempts to make before generating an error. The default value for this field is 3. (This field cannot be changed.)

Local Service Name – Displays the local service name. The default value for this field is IcAppsConapiServiceClient. (This field cannot be changed.)

Local Registry Port – Enter the port number required for the local registry. The default value for this field is 3099. If the port requires a different number, you can erase the default and replace with another number.

Local Port – Enter the port number required for the local connection. The default value for this field is 1098. If the port requires a different number, you can erase the default and replace with another number.

Conapi Service Host Name – Enter a unique name for the Conapi Service Host. (Required)

Conapi Service Host IP Address – Enter the Internet Protocol (IP) address for connecting to the Conapi Service host. (Required)

Testing the Side A Configuration

Test your configuration for the side A connection by clicking the Test button. If a test fails, check your side A configuration to ensure all information is correct.

Saving Changes

Save the configuration on this tab by clicking the Save button.

Continuing the Source Control Configuration

Continue the new source system configuration by completing the fields and options within the Side B tab. See Configure a New Source Control - Side B Tab for additional assistance.

See Also